SPLODER 1400gr submersible

The SPLODER® MULTITOOL - A submersible black powder noisemaker on a leash. Milled from solid 416 stainless steel. 

capable of handling a self-measured 1400 grain Pyrodex® charge.

(The stainless steel ring is removable for loading or for upright

signal cannon operation.) With the noisemaker submerged in 2 feet of

water, it will produce a 60-foot tall water spout. A submerged

M1400S SPLODER®, although quiet, creates a shockwave you

can feel in the ground 30 feet away.

LOADING:

Insert a quality 1/8" cannon fuse and fill to the top of the bore (self-

measured 1400 grains), tamp your charge before adding your

wadding, and then tamp again. GOEX® (Black Powder) Fg - FFFg. Requires 1/8" fuse. 

Waterproof using 2.5" circular labels (canning labels) to seal the top of the

bore. Duct tape can also be used. It's not necessary to waterproof

the the flash hole as long as the noisemaker's bore is tightly sealed.

SPECIFICATIONS:

EFFECTIVE CAPACITY: 500 - 1400 grains (full loads not

necessary)

NOISMAKER (416 Stainless) = 2.75" D x 5.75" H - 1.500" BORE |

WEIGHT 7.2 LBS

TAMPER (6061 Aluminium) = 0.875" D x 5.75" H

CABLE HARNESS (Galvanized | Vinyl Coated) = 0.240" D x 15'

SET (Does not include powder or fuse.)

MADE IN THE USA

REMEMBER TO CHECK YOUR STATE AND LOCAL LAWS